R1 / S1 / G2 Type Sanitary Feeder

 


*****************************************************
I jump in the new website three seconds later.
When you do not jump, please click the following URL.

http://www.gmec.co.jp/english/products/index_01_11.html
*****************************************************

For Equipment that Requires Cleaning on Disassembly

Allows accurate feed even under sanitary specifications.

Features
  • One-touch assembly and disassembly allows for easy cleaning and materials switching.
  • Because it is possible to select the model to match its intended use and the powder properties, accurate feed even under sanitary specifications is easily achievable.
  • This type is adequate for equipment that requires sanitary oversight.

S1 Type
供給盤型式
Feeding Table Type
切出方式
Leveling System
用途
Application
R1型(Type) リングテーブル
Ring table
自然落下式
gravitational
湿粉粒体
Wet powder
S1型(Type) ステップテーブル
Step table
スクレーパー式
Scraper
乾燥粉粒体
Dry powder
G2型(Type) グルーブテーブル
Groove table
スクレーパー式
Scraper
付着性粉粒体
Adhesive powder

Feeding Tables

 

R1 Type Details
Features

  • Due to the structure which can feed the powders with the fixed volume of mass, highly accurate, steady, and continuous feeding is possible.
  • Stable feeding of highly adhesive wet powders and cakes is possible.
Make-up
The stored powder or grain materials are deposited inside the feeding table (4) by the agitator (9) with constant density and without compression through the scraper plate (8).

The deposited powder or grains with fixed amount are continuously sent into the chute (7).

A wide range of feed rate settings are possible by altering the rotation speed of the feeding table at the inverter.

R1 Type Construction
 

S1 Type Details
Features

  • Continuous feeding is possible without deforming the grains of powders, flakes, and pellets and with less biting/abrasion.
  • As powders deposited into the feeding table are continuously scooped by the scraper, continuous feeding without pulsation is made possible.
Make-up
The stored powder or grain materials are deposited inside the feeding table (4) by the agitator (5) with constant density and without compression through the scraper plate (11).

The deposited powder or grains with fixed amount are scooped out continuously with the scraper (9), and then sent into the chute (8).

Adjustment of the feed rate is performed by varying rotation speed at the inverter.

A wide range of feed rate settings are possible through the scraper adjustment handle (10) (optional).

S1 Type Construction
 

G2 Type Details
Features

  • As this feeder is constructed to use the scraper to forcibly scoop even small amounts of adhesive powder or grain materials, stable feeding is possible.
  • Due to that two drive shafts are applied to the feeding table drive and the agitator drive individually (twin drive shaft system). the feeder inlet diametercan be widened allowing even small amount ofpowder or grain materials to be fed without the occurrence of bridging.
Make-up
With the spout (6) (powder pressure reducing device) at feeder inlet (7) and the agitator (5), stored powder or grain materials are deposited inside the feeding table (10) with constant density and without compression.

The deposited powder or grains with fixed amount are scooped out continuously with the scraper (9), and then sent into the chute (8).

A wide range of feed rate settings are possible through joint adjustments to the scraper position (9) and by altering the rotation speed of the feeding table at the inverter.

G2 Type Construction
 

Specification
供給量(Max)
Feed rate
モーター出力
Motor Power
概略重量
Weight
R1-04 500L/h 0.4kW 190kg
R1-05 1000L/h 0.75kW 270kg
S1-03 500L/h 0.4kW 160kg
S1-04 1100L/h 0.75kW 190kg
S1-05 2300L/h 0.75kW 270kg
G2-03 50L/h 0.2kW 200kg
G2-04 150L/h 0.4kW 220kg
G2-05 400L/h 0.75kW 290kg
 

Applicable Powder Material List for Feeders

R1 Type    Ring Table
お茶粉 Tea powder 活性炭 Activated carbon
顔料 Pigment 脱水ケーキ Dehydrated cake
有機飼料 Organic feed 乾操汚泥 Dried sludge
肥料 Fertilizer
S1 Type    Step Table
食塩 Salt ペレット Pellet
Sand フレーク原料 Flake type material
ガラスピーズ Glass beads 顆粒原料 Granular material
グラックス Flax
G2 Type    Groove Table
小麦粉 Flour ワックス Wax
だしの素 Seasoning シリ力 Silica
ビスフェノール Bisphenol クレー Clay
タルク Talc ベンガラ Jeweler’s rouge

 
Back To Top