SGF Type Smooth Auto Feeder

 


*****************************************************
I jump in the new website three seconds later.
When you do not jump, please click the following URL.

http://www.gmec.co.jp/english/products/index_01_04.html
*****************************************************

For Feeding Without Deformation of Particles

Adequate for the feed of materials prone to sticking and abrasion.

Features

The amount of deformation to the raw materials is extremely minimal.
Through the combined use of the step feeding table and scraper, continuous feeding to the next processing step is possible with only minimal compaction or friction occurring within the raw materials.

Continuous feeding without pulsation is possible.
As raw materials fed into the feeding table are continuously cut out by the scraper, continuous feeding without pulsation is made possible.

A wide range of feed rate settings are possible.
Through the combined use of the inverter and the scraper adjustment handle (optional), a wide range of feed rate settings are possible.

Low incidence of bridging.
Due to the fact that two drive shafts are applied to the feeding table drive and the agitator drive individually (twin drive shaft system), the feeder inlet diameter can be widened allowing even small amounts of powders to be fed without the occurrence of bridging.


SGF TypeSGF Type
 

Details
Outline
The SGF Type Smooth Auto-Feeder is a quantitative feeder that allows continuous feeding without deforming the shape of powders, flakes, pellets or clusters.

Through the combined use of the step feeding table and scraper, continuous feeding to the next processing step is possible without compaction or friction occurring within the raw materials.

This feeder is widely used in various industries as a “non-pulsating feeder”.

Also, within our lineup there are available the single drive shaft SGF Type and the dual drive shaft CSGF Type Feeders.

Customers can select the type most suited to their needs or our company can make recommendations.

Make-up
The accumulated raw material is filled into the feeding table (5) by the agitator (1) in a non-compacted and uniform state.

After being cut into a fixed volume, the raw material that was filled into the feeding table (5) is sent along the scraper (6) into the chute (7).

Adjustment of the feed rate is performed by varying rotation speed at the inverter.

Furthermore, through the usage of the scraper adjustment handle (optional), an even wider range of feed rate settings are possible.
 


 
SGF Type Construction
 

Specification
供給量(Max)
Feed rate
モーター出力
Motor Power
概略重量
Weight
SGF-50 280L/h 0.4kW 120kg
SGF-100 600L/h 0.75kW 200kg
SGF-200 2m3/H 1.5kW 350kg
SGF-300 6m3/H 2.2kW 600kg
SGF-400 13m3/H 3.7kW 1000kg
SGF-500 30m3/H 5.5kW 1400kg
SGF-600 60m3/H 7.5kW 2300kg
SGF-700 150m3/H 11kW 3300kg
CSGF-10 6L/h 0.2kW 50kg
CSGF-20 12L/h 0.4kW 75kg
CSGF-30 130L/h 0.75kW 90kg
 

Applicable Powder Material List for Feeders

フラックス Flux 石炭 Coal
アルミナ Aluminum 乾燥木質活性炭 Dried wood activated charcoal
ワックス Wax 塊炭 Rider coal
シリカ Silica 焼却灰 Burned ash
酸化チタン Titanium oxide 乾燥汚泥 Dried sludge
酸化鉄 Ferrite 合成ゴム破砕品 Broken synthetic rubber
シアン Cyanogens カーボン系微粉 Carbon minute powder
炭酸ソーダ Sodium carbonate 洗剤 Detergent
黒鉛 Graphite 粘土 Clay
粒状ベンガラ Granular red oxide ビスフェノール Bisphenol
硅砂 Silica 肉骨粉 Meat and bone meal
PETレジン PET resin 脱脂糖 Delipidated Sugar
重合防止剤 Polymerization inhibitor 尿素 Urea
フェノール樹脂ペレット Phenolic resin pellet 球状活性炭 Spheroidal activated carbon
樹脂ペレット Resin pellet フェロボン Ferroboron
塩ビペレット Vinyl chloride pellet AL合金 Aluminum alloy
合成ゴムペレット Synthetic rubber pellet ナイロン Nylon
プラスチックペレット Plastic pellet 化学肥料 Chemical fertilizer
SCペレット Scandium pellet テトロンフレーク Tetoron flake

 
Back To Top