Tag : Adhesive Powders

RD / RE / RS Type


*****************************************************
I jump in the new website three seconds later.
When you do not jump, please click the following URL.

http://www.gmec.co.jp/english/products/index_01_16.html
*****************************************************

For Wet and Cake Powders

Allows the stable feed of powders difficult to feed and expel.

Features
  • By increasing the entrance diameter, stable feed is possible without bridging.
  • Because it is possible to select the model based on the requirements of powder properties, this type can also be used for dry powder.

RS Type
 

RD Type Details
Outline
Makes the Feeding of Highly Adhesive Wet Powders Possible

Through the combined use of the special-configuration ring feeding table and the scraper no revolving on the feeding table occurs, making stable feeding of highly-adhesive wet powders possible.

Make-up
Retained powder are separated by the agitator (4) and in a non-compacted state are filled from the spout aperture (5) to the feeding table (7).

Filled powder are moved to the chute (6), where the scraper (7) forcibly cuts the powder into the chute (6).

Adjustment of the feed rate is performed through variations in the rotation speed through spout adjustments (5) and the inverter.

RD Type Construction
 

RE Type Details
Outline
Makes Possible the Stable Feeding of Powders Difficult to Expel and Feed

The combination of the scraper plate aperture being set to the characteristics of the powders and the ring-type feeding table makes possible the stable feeding of difficult powders from dry powders to fibrous and spongy materials.

Make-up
Retained powder are separated by the agitator (5) and in a non-compacted state are filled from the scraper plate (4) to the feeding table (7).

Filled powder are cut to a fixed volume and are continuously feed to the chute (6).

Adjustment of the feed rate is performed by varying rotation speed at the inverter.

RE Type Construction

 

RS Type Details
Outline
Makes Possible the Expulsion and Feeding of Irregularly Shaped Raw Materials and Cake Powders

Through the combined use of the ring-type feeding table and scraper, the expulsion and feeding of hard-to-expel irregularly shaped raw materials and cake powders is possible.

Anti-Compacting Function Makes Possible the Stable Feeding of Irregularly Shaped Materials

Performing forward-reverse alternating operation through timed operation or the load torque screening function protects against compaction of the raw materials and allows stable feeding.
(For feeding raw materials such as factory refuse)

Make-up
Retained powder are separated by the agitator (5) and in a non-compacted state are filled to the feeding table (7) through the scraper plate (4).

Filled powder are cut to a fixed volume, where the scraper (8) forcibly cuts the powder into the chute (6).

Adjustment of the feed rate is performed by varying rotation speed at the inverter.

RS Type Construction
 

Specification
供給量(Max)
Feed rate
モーター出力
Motor Power
概略重量
Weight
RD-03 1m3/h 0.4kW 150kg
RD-05 2m3/h 0.75kW 400kg
RD-07 5m3/h 1.5kW 800kg
RD-10 10m3/h 2.2kW 1500kg
RD-12 15m3/h 3.7kW 1700kg
RD-14 20m3/h 3.7kW 2200kg
RD-16 25m3/h 5.5kW 2700kg
RD-18 35m3/h 5.5kW 3400kg
RD-20 45m3/h 7.5kW 4300kg
RD-24 60m3/h 7.5kW 5500kg
供給量(Max)
Feed rate
モーター出力
Motor Power
概略重量
Weight
RS,RE-04 0.5m3/h 0.4kW 250kg
RS,RE-05 1m3/h 0.75kW 350kg
RS,RE-07 3m3/h 1.5kW 700kg
RS,RE-10 10m3/h 2.2kW 1300kg
RS,RE-12 15m3/h 3.7kW 1500kg
RS,RE-14 20m3/h 3.7kW 1800kg
RS,RE-16 25m3/h 5.5kW 2200kg
RS,RE-18 35m3/h 5.5kW 2800kg
RS,RE-20 45m3/h 7.5kW 3500kg
RS,RE-24 60m3/h 7.5kW 4500kg
 

Examples of Applications
Powder Processing Line
Measuring-type Pneumatic-Transport System

Powder Processing Line / Measuring-type Pneumatic-Transport System

Storage and Feeding System
Receiving and Feeding System

Storage and Feeding System / Receiving and Feeding System

Batch Weighing System
Chemical Feeding System

Batch Weighing System / Chemical Feeding System
 

Applicable Powder Material List for Feeders

消石灰 Slaked lime 脱水ケーキ Dewatered sludge
生石灰 Quick lime バガス Bagasse
セメント Cement 木チップ Wood chip
ウェット活性炭 Wet activated carbon RDF Refuse derived fuel
炭酸カルシウム Calcium carbonate ゴム Rubber
水酸化アルミニウム Hydrated alumina 廃プラスチック Waste plastic
タルク Talc 古紙 Waste paper
オイルコークス Oil cokes 石膏ボード粉 Gypsum board powder
石炭化合物 Coal compound 肥料 Fertilizer
硫酸第一鉄 Ferrous sulfate 飼料添加物 Feed grain
メタバナジン酸アンモニウム Sodium metavanadate パルプ粉 Pulp powder
食塩 Salt 乾燥汚泥 Dry sludge
AL 系無機物 AL system inorganic substance 焼却灰 Burned ash
ベンガラ Jeweler’s rouge 溶融飛灰 Melted fly ash
活性炭 Activated carbon 重油灰 Heavy oil ash

 
Back To Top

MP Type


*****************************************************
I jump in the new website three seconds later.
When you do not jump, please click the following URL.

http://www.gmec.co.jp/english/products/index_01_10.html
*****************************************************

For the Stable Feed of Molten Fly Ash

Allows the stable feed difficult-to-handle materials such as melted fly ash.

Features
  • The thin encircling-type feeding table allows stable feed without adhesion or flushing.
  • Through its powder pressure alleviation mechanism, stable feed is possible without the effects of compacting .

MP Type
Details
Structure
The powder or grain stored in the silo at the upper stage enters the cylinder (11) through the spout (10) from the center while being roated and the guide bar (9). The powder in the cylinder is untied by the stirring blade (7) and is successively sent to the measure on the feed table (6) through three ports of the leveling plate (7).

The powder filled in the measure is leveled to a certain quantity at the final port and is conveyed to the port of the receiving disk (5) to be continuously dropped to the chute (12).

The feeding quantity is adjusted by varying the number of revolutions of the feed table.

Usage
Fused fly ashes, burned fly ashes (clinker mixed), heavy oil ashes, humidified powder, adhesive powder, etc.
 

No. Name
1 Motor
2 Reduction Gear
3 Vertical Shaft
4 Grand Packing
5 Bottom Pan
6 Feeding Table
7 Scraper Plate
8 Agitating wing
9 Guide Rod
10 Spout
11 Vessel
12 Chute

 

Specification
供給量(Max)
Feed rate
モーター出力
Motor Power
概略重量
Weight
MP-04 1m3/h 0.4kW 500kg
MP-05 2.5m3/h 0.75kW 550kg
MP-06 4.5m3/h 1.5kW 650kg
MP-07 7m3/h 1.5kW 800kg
MP-09 14m3/h 2.2kW 1100kg

 
Back To Top

CF Type


*****************************************************
I jump in the new website three seconds later.
When you do not jump, please click the following URL.

http://www.gmec.co.jp/english/products/index_01_01.html
*****************************************************

Continuous Feed Without Pulsation

Even with only a small amount of adhesive powder this machine provides continuous feed with no pulsation.

Features

The actualization of continuous feeding without pulsation
As powders deposited into the feeding table are continuously scooped by the scraper, continuous feeding without pulsation is made possible.

A wide range of feed rate settings are possible
By also adjusting the inverter and scraper depth, a wide range of feed rate settings are possible.

Stable feeding is possible even for adhesive powders
As this feeder is constructed to use the scraper to forcibly scoop even small amounts of adhesive powders, stable feeding is possible.

No bridging
Due to that two drive shafts are applied to the feeding table drive and the agitator drive individually (twin drive shaft system),
the feeder inlet diameter can be widened allowing even small amount of powder to be fed without of bridging.

The actualization of accurate feeding
As this feeder is constructed to use the spout (powder pressure reducing device) to prevent of powder compression, fluctuations in bulk density can be minimized.
As a result accurate feeding is possible.


CF Type
CF Type
 

Details

Outline
The Smooth Auto Feeder (CF-type) is a quantitative feeder that has a unique two-axle feed method as well as a groove feeding table/scraper attached to the feeding unit to enable a consistent, continuous feed.

By using a scraper to forcibly trim off powder loaded onto the feeding table, this machine provides stable, continuous feeding to the next process even if the powder is somewhat adhesive.

With the technology and trust we have built up over half a century of doing business, we have developed a proven track record with countless fulfilled orders from many industries, and are well-loved for our “Consistent, Accurate Quantitative Feeders”



Make-up
With the spout (1) (powder pressure reducing device) at feeder inlet and the agitator (3), stored powder or grain materials are deposited inside the feeding table (6) with constant density without compression.

The deposited’ powder or grains with fixed amount are scooped out continuously with the scraper (8), and then fed into the chute (9).

Wide ranges of feed rate are possible by adjusting the scraper (8) position and altering the rotation speed of the feeding table by inverter.

 1  スポート Spout
 2  下部円筒 Lower Vessel
 3  撹拌体 Agitator
 4  スパーギヤ Spur Gear
 5  減速機 Reduction Gear
 6  供給盤 Feeding Table
 7  フィードメータ Feed Meter
 8  スクレーパー Scraper
 9  シュート Chute


CF Type Construction
 

CF-50 Type
For equipment requiring feed rate for 0.85cc/min
CF-50
CF-50

 1  モーター Motor
 2  Vベルト V Belt
 3  ベルトカバー Belt Cover
 4  受盤 Bottom Pan
 5  フィードメータ Feed Meter
 6  アクリル円筒 Acryl Vessel
 7  コモンベッド Common Bed
 8  減速機 Reduction Gear
 9  シュート Chute

CF-50 Structure

CF-50 Specification
型式
Type
型式分類
Class
供給量 (Max)
Feed rate
モーター出力
Moter Power
円筒容量
Vessel Volume
概略重量
Weight
CF-50 CF-52 1 L/h 0.2 kW 4 L 30 kg
CF-53 2 L/h 0.2 kW 4 L 30 kg
 

CF-100 ~ 300 Type
For equipment requiring the small feed rate for powder like additives
CF-300
 1  モーター Motor
 2  ベルトカバー Belt Cover
 3  Vベルト V Belt
 4  受盤 Bottom Pan
 5  下部円筒 Lower Vessel
 6  上部円筒 Upper Vessel
 7  コモンベッド Common Bed
 8  減速機 Reduction Gear
 9  シュート Chute
 10  フィードメータ Feed Meter

CF-100~300 Structure

CF-100 ~ 300 Specification
型式
Type
型式分類
Class
供給量 (Max)
Feed rate
モーター出力
Moter Power
概略重量
Weight
CF-100 CF-103 2.9 L/h 0.2 kW 50 kg
CF-105 6 L/h
CF-200 CF-203 6 L/h 0.4 kW 70 kg
CF-205 12 L/h
CF-300 CF-308 48 L/h 0.75 kW 90 kg
CF-310 75 L/h
CF-312 105 L/h
CF-315 130 L/h
 

CF-500~800 Type
For equipment requiring precision, stable feeding without pulsation
CF-500
 1  コモンベッド Common Bed
 2  モーター Motor
 3  ベルトカバー Belt Cover
 4  Vベルト V Belt
 5  減速機 Reduction Gear
 6  受盤 Bottom Pan
 7  下部円筒 Lower Vessel
 8  上部円筒 Upper Vessel
 9  シュート Chute
 10  フィードメータ Feed Meter

CF-500 Structure

CF-500 ~ 800 Specification
型式
Type
型式分類
Class
供給量 (Max)
Feed rate
モーター出力
Moter Power
概略重量
Weight
CF-500 CF-510 90 L/h 1.5 kW 380 kg
CF-515 200 L/h
CF-520 300 L/h
CF-528 600 L/h
CF-535 900 L/h
CF-600 CF-630 1.0 m3/h 2.2 kW 510 kg
CF-640 1.5 m3/h
CF-655 3.0 m3/h
CF-700 CF-740 1.9 m3/h 3.7 kW 680 kg
CF-755 3.6 m3/h
CF-770 6.0 m3/h
CF-800 CF-890 15.0 m3/h 5.5 kW 1000 kg
 

Examples of Applications with CF-type Feeders
CFD-300S-SP
all-stainless construction allow to feed corrosive powder.
CF-200S-SP
Capable of pneumatic transporting for small volumes of powders with the ejector.

CFD-500S-SP
Capable of powder feeding from the flexible container bag.
CFD-300S-SP
Capable of stable feed rate control with weighing system.
 

Applicable Powder Material List for Feeders

消石灰 Slaked lime ポリエチレン Polyethylene
炭酸カルシウム Calcium carbonate 重曹 Sodium bicarbonate
活性炭 Activated carbon フッカアルミニウム Aluminum fluoride
セメント Cement シリカ Silica
珪藻土 Diatomite カーボン Carbon
フライアッシュ Fly ash ポリマー Polymer
ソーダ灰 Soda ash 酸化チタン Titanium oxide
フラックス Flux タルク Talc
微粉炭 Galvanized coal クレー Clay
アルミナ Aluminum ベントナイト Bentonite
小麦粉 Flour 亜鉛粉末 Zinc powder
砂糖 Sugar ステアリン酸 Stearic acid
食塩 Salt メチルセルロース Methyl cellulose
澱粉 Starch クエン酸 Citric acid
酵母 Yeast ビタミン剤 Vitamin powder
ワックス Wax マグネシウム Magnesium
ベンガラ Jeweler’s rouge JIS ダスト JIS Dust
米粉 Rice powder トナー Toner
炭酸バリウム Barium carbonate ニッケル Nickel

 
Back To Top