Tag : Granular and Clusters

TCF Type


*****************************************************
I jump in the new website three seconds later.
When you do not jump, please click the following URL.

http://www.gmec.co.jp/english/products/index_01_09.html
*****************************************************

For the Feed of Various Forms of Materials

Continuous Feed is Possible without Deformation of the Material.

Features
  • Allows the feed of flake, pellet, powder, cluster, and fiber materials.
  • Continuous feed without pulsation is made possible because of its flat type feeding table.
  • Forcibly extracts material from inside the feeder, therefore no material remains.

TCF Type
 

Details
Make-up
Powdery materials (medicines) laid up in the hopper filled up on the table through the feeding spout then along the scraper the materials can be conveyed out quantitatively through the chute Driving begins with motor goes intermediary with Vbelt conveyed to the feeding table.

Adjustment of the feeding volume can be done by the revolution per minute of the table and the degree of the extent of the spout adjustment system. Adjustment Spout is able to set with the scale.

The setting of the feeding volume can be done just to set the number of the rotation of Variable motor or to set the Spout scale.

 1  ホッパー Hopper
 2  撹拌羽根 Agitating Wing
 3  スポート Spout Cylinder
 4  テーブル Table
 5  減速機 Speed Reducer
 6  円筒 Casing
 7  スクレパー Scraper
 8  シュート Chute

TCF Type Construction
 

Specification
供給量(Max)
Feed rate
モーター出力
Motor Power
概略重量
Weight
TCF-05 5L/h 0.2kW 80kg
TCF-1 15L/h 0.4kW 100kg
TCF-2 30L/h 0.4kW 120kg
TCF-3 100L/h 0.75kW 160kg
TCF-4 300L/h 0.75kW 250kg

 
Back To Top

T Type


*****************************************************
I jump in the new website three seconds later.
When you do not jump, please click the following URL.

http://www.gmec.co.jp/english/products/index_01_08.html
*****************************************************

For the Feed of Various Forms of Materials

Continuous Feed is Possible without Deformation of the Material.

Features
  • Allows the feed of flake, pellet, powder, cluster, and fiber materials.
  • Continuous feed without pulsation is made possible because of its flat type feeding table.
  • Forcibly extracts material from inside the feeder, therefore no material remains.

T Type
 

Details

Make-up
Power or granular material stocked in the Hopper is charged and replaced to the Feeding Table 7 from the Upper Vessel 9 , and is moved along the Scrape Plate 6 and discharged continuously from the Exit Chute 4 . The adjustment of the Feeding Volume is done by the revolution change and the adjustment of the Exit Gate 10 .
 

No. Name
1 Motor
2 Reduction Gear
3 Vertical Shaft
4 Exit Chute
5 Bottom Pan
6 Scrape plate
7 Feeding Table
8 Lower Vessel
9 Upper Vessel
10 Exit Gate

T Type Construction
 

Specification
供給量(Max)
Feed rate
モーター出力
Motor Power
概略重量
Weight
T-03 500L/h 0.75kW 400kg
T-05 2m3/h 1.5kW 700kg
T-07 5m3/h 1.5kW 1100kg
T-10 10m3/h 2.2kW 1700kg
T-15 30m3/h 5.5kW 3200kg
T-20 50m3/h 11kW 5000kg
T-24 60m3/h 15kW 7000kg

 
Back To Top