 |
| While feeding, this device continuously measures the actual weight of the powder by the small sized load cell which is built in a feedig mechanism part of the conventional smooth atuo feeder. It is completely new continuous weighing equipment which performs calculation and rpm readings simultaneously and operates PID controls for an arbitrary setting value.
|
|
|
| < Features&Merits > |
 | Large scale reduction in cost with having maintained performance.
No requires weight hopper and charge unit, etc.
With decrease of various control equipments, it reduces electricity and power cost. |
| Reduce construction expenses by space-saving.
Configure weighing system within feeder installation space. |
| Even multiple direction, realizes the actual weight measurement control simultaneously and independently.
Reduction in cost and space-saving by simplifing the entire equipment. |
| No influence of external disturbance such as contact and vibration.
Reduction in disturbance measures cost(rain, wind, vibration protection,etc.) during installation.
Installation condition is similar to normal equipment. Outdoor installation is possible. |
| Highly accurate and wide-range control limits.
Highly precise weighing is possible in a wide range as measured weight is uniform regardless to the increase or decrease of feeding amount. |
| Even a little adhesion being monitored and the supply weight is uniformly control and followed.
As the weight of adhesion is not detected as the load, only the actual weight is calculate and supply. |
The above mentioned features and merits are also optimum for remodeling and replacing the existing equipment.Ensure weighing implement system of presently errand equipment at economical cost just in the installation space of our company's feeder .
|
 |
 |
We are very pleased to have lots of request for test presentation.
Thus adjustment of schedule might be necessary and we sincerely apologize for your inconvenience. So, please convey your desire date for the test request through the above mentioned form or by the personnel in charge. |
 |
|
|
|
